Console House 10 Mode Instrukcje Operacyjne Pobierz pdf (Strona 28)

7. Press the ' * ' twice to return to the top-level display. Have a

partner open each door and window, then close it. The display

should show the zone name as being "NOT RDY" and then return

to "SYSTEM OK."

8. Trip all motion detectors; the same should happen.

9. Notify your Central Station that you intend to test the system. To

test the interior sounder and exterior siren, press the 1 and 3 keys

simultaneously. Press the OFF key and your Code within 5

seconds to prevent the system from dialing out. You should have

heard both sirens activate.

10. Test your smoke detectors as recommended by the manufacturer.

Be ready to silence the alarm system as soon as it sounds.

11. Pick up an inside phone and press the # key. When the menu is

spoken, press 8, then 3. The Omni should say "ADDRESS IS:"

and play your name and address. If it does, the telephone dialer,

telephone access and telephone control systems are all working

correctly.

12. Turn on, then off each lamp or appliance module used in the

When Alarm macro and Flash For Alarm purposes.

13. If you wish to test your system's link to your Central Station

monitoring service, call them first and inform them that you will

be testing your alarm system. Set off the alarm, allowing

sufficient time for any dial out delays that you may have, then turn

the alarm system Off. The Central Station should receive the

alarm code.

14. Test is complete. Be sure that you have restored any bypassed

zones.

Your Omni controller and the consoles are designed to require very

little maintenance.

Omni

Maintenance

28 Omni Owner's Manual

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 135 136

Brak uwag

Console House 10 Mode Instrukcje Operacyjne Strona 28